Vaporesso XROS 6 Mini Pod Kit Overview

1650mAh Battery | Up to 30W Output | 2ml Refillable Pod | 0.6Ω COREX 3.0 Pod Included | Adjustable Side Airflow | MTL & RDL | Inhale Activated | USB-C Charging

The Vaporesso XROS 6 Mini is a compact refillable pod kit built around a 1650mAh internal battery. It measures 110.7mm by 24.55mm by 14.65mm, so it holds a larger cell than most devices of this size while staying easy to pocket. Vaporesso rates it at up to four days of use between charges, based on its own lab testing.

There are no buttons and no menus. The device reads the fitted pod and sets the power itself, up to a maximum of 30W. Two quick puffs switch between Eco Mode, which stretches battery life, and Power Mode, which raises output for a warmer, fuller draw. A five-light LED indicator on the front shows the remaining charge in 20 percent steps.

A 0.6Ω COREX 3.0 mesh pod is supplied in the box. It holds 2ml of e-liquid and fills from the top once the mouthpiece is lifted off, and the coil is designed to saturate in around a minute rather than the usual longer wait. The airflow slider on the side of the device moves the draw from a tight MTL inhale through to a looser RDL one, so the vaping style can be changed without swapping pods.

Charging is over USB-C at 5V/2A. A cable is not supplied with the kit. If you are comparing it against other pod kits, the draw is the main point of difference, since few devices this small cover both MTL and RDL.

Key Features

• 1650mAh internal battery, rated by Vaporesso at up to four days per charge
• Automatic power matching, up to 30W maximum output
• Eco Mode and Power Mode, switched with two short puffs
• Five-LED tidal battery indicator in 20 percent steps
• Adjustable side airflow slider for MTL and RDL vaping
• 0.6Ω COREX 3.0 mesh pod included, 2ml capacity
• Top filling under a removable mouthpiece
• COREX 3.0 mesh coil with fast saturation, ready in around one minute
• VENTURI airflow system for a quieter, smoother draw
• SSS Leak-Resistant Technology 2.0
• Inhale activated, no buttons
• USB-C charging at 5V/2A, cable not included
• Aluminium alloy body, 110.7 x 24.55 x 14.65mm
• Compatible with the full XROS COREX pod range

Compatible Pods

The XROS 6 Mini takes the full XROS pod range, so any of the XROS COREX 3.0 pods will fit. Each pod holds 2ml, fills from the top and has its coil built in, so there is nothing to change separately.

• 0.4Ω, 25W to 30W, RDL, suited to higher VG e-liquid
• 0.6Ω, 21W, MTL, supplied with the kit
• 0.8Ω, 16W, MTL
• 1.0Ω, 12W, MTL
• 1.2Ω, 10W, tight MTL

The 0.6Ω, 0.8Ω, 1.0Ω and 1.2Ω pods are all intended for mouth to lung vaping and work best with 50/50 e-liquid. The 0.4Ω pod opens the draw up for restricted direct to lung vaping and is better matched to higher VG blends.

Specifications

• Battery capacity: 1650mAh, built in
• Maximum output: 30W
• Power control: automatic, set by pod resistance, with Eco and Power modes
• Charging: USB-C, 5V/2A
• Pod capacity: 2ml
• Included pod resistance: 0.6Ω COREX 3.0 mesh
• Compatible resistances: 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω, 1.2Ω
• Fill method: top fill under the mouthpiece
• Airflow: adjustable side slider
• Draw style: MTL & RDL
• Activation: inhale
• Battery indicator: five LEDs, 20 percent steps
• Dimensions: 110.7 x 24.55 x 14.65mm
• Body material: aluminium alloy

What's in the Box

• 1 x Vaporesso XROS 6 Mini device
• 1 x XROS COREX 3.0 0.6Ω mesh pod, 2ml
• 1 x User manual & warranty card

A USB-C charging cable is not included.

FAQs

Which e-liquid should I use with the XROS 6 Mini?

The included 0.6Ω pod is a mouth to lung setup, so 50/50 e-liquid works best, in either nic salt or freebase form. If you fit the 0.4Ω pod for a looser restricted direct to lung draw, move to a higher VG e-liquid instead.

Does the XROS 6 Mini work with older XROS pods?

Yes. The device accepts the full XROS pod range, so COREX 2.0 pods will fit alongside the current COREX 3.0 ones. The COREX 3.0 pods are the newer version and carry the updated mesh and the upgraded leak-resistant sealing.