Aspire Loomix Replacement Pods

Aspire Loomix Replacement Pods Overview

Refillable Pod | Built-In Mesh Coil | Top-Fill | 0.4Ω to 1.2Ω | MTL & RDTL Vaping | 2-Pack

The Aspire Loomix Replacement Pods are made for the Aspire Loomix Pod Kit. Each pod has a built-in mesh coil, so you replace the whole pod once the coil wears out. Pods are top-filled through the mouthpiece, hold 2ml or 3ml of e-liquid depending on the variant, and are supplied in a 2-pack. They are part of the wider Aspire range.

To fill, remove the mouthpiece, add e-liquid through the top port, then refit the mouthpiece. With a new pod, leave it to stand for around ten minutes so the coil saturates. As with our other replacement pods, pair these with a 50% VG e-liquid, or one with a higher PG content, for the best results.

Five resistances are stocked. The 1.0 and 0.8 Ohm pods give a tighter MTL (Mouth To Lung) draw, the 0.6 Ohm sits between MTL and RDTL, and the 0.4 Ohm pod gives a looser RDTL (Restricted Direct To Lung) draw.

Key Features

• Built-in mesh coil, replace the whole pod
• Top-fill through the mouthpiece
• 2ml and 3ml capacity options
• Available in 0.4Ω, 0.6Ω, 0.8Ω, and 1.0Ω 
• MTL and RDTL vaping
• Works with 50% VG or higher PG e-liquids
• Supplied as a 2-pack

Compatible Device & Coil Options

Compatible device: Aspire Loomix Pod Kit.

• 1.0 Ohm, built-in mesh, MTL (11-13W)
• 0.8 Ohm, built-in mesh, MTL (13-15W)
• 0.6 Ohm, built-in mesh, MTL to RDTL (16-19W)
• 0.4 Ohm, built-in mesh, RDTL (21-27W)

The coils are fixed inside each pod and cannot be removed or replaced on their own.

Specifications

• Brand: Aspire
• Product: Loomix Replacement Pods
• Pod type: Refillable
• Coil: Built-in mesh, non-replaceable
• Resistances: 0.4Ω, 0.6Ω, 0.8Ω, 1.0Ω,
• Capacity: 2ml or 3ml, variant dependent
• Filling: Top-fill via mouthpiece
• Recommended e-liquid: 50% VG or higher PG
• Pack size: 2 pods

What's in the Box

• 2 x Aspire Loomix Replacement Pods

FAQs

How do I fill the Aspire Loomix pods?

Remove the mouthpiece, fill through the top port with your e-liquid, then refit the mouthpiece. Leave a new pod to stand for about ten minutes before vaping so the coil can soak.

Can I replace just the coil?

No. The mesh coil is built into each pod, so you replace the whole pod once the flavour drops off or the coil wears out.